Can the camera CIVS-IPC-2935 be installed on the wall mount bracket CIVS-IPCA-1011?

[Matrework]

Hallo!

I have a question: can the camera CIVS-IPC-2935 be installed on the wall mount bracket CIVS-IPCA-1011=, and сan it be powered from the CIVS-IPCA-PWR12V= (cable CIVS-CAB-BCE)?

Thx!

[Matrework]

Hi Konstantin,

Thank you for contacting Cisco Partner Helpline.

My name is Lynzie, I will be assisting you with case <00525248> regarding your inquiry about the compatibility of the CIVS-IPCA-1011= and CIVS-IPCA-PWR12V= with the CIVS-IPC-2935.

I went ahead and checked with our internal resources and I was advised that the CIVS-IPCA-1011= is compatible with the CIVS-IPC-2935.

Unfortunately the CIVS-IPCA-PWR12V= is not compatible with the CIVS-IPC-2935. The CIVS-IPC-2935 uses 24 VAC or 24 VDC power.

CIVS-IPC-2935

Outdoor Pendant, Clear Dome, PAL, 35x, SD PTZ IP Camera     

List Price: USD  4,900.00

CIVS-IPCA-1011=

Wall mount, use with CIVS-IPCA-1010, 2500, 26xxV Dome series List Price: USD 50.00

CIVS-IPCA-PWR12V=

Cisco IP Camera Power Supply

List Price: USD 60.00

Please reference these links:

Cisco Video Surveillance 2900 IP Camera User Guide Installation

http://www.cisco.com/en/US/docs/security/physical_security/video_surveillance/ip_camera/2900/user_guide/ch01.html#wp1073728

Cisco Video Surveillance 2900 Series IP Cameras Compare Models http://www.cisco.com/en/US/partner/products/ps11252/prod_models_comparison.html#~accessories

[gsimenc]

Konstantin,

while the answer provided by the Partner Helpline is not wrong, it requires a clarification.

While you can use CIVS-IPCA-1011 wall mount, you will still need a threaded pipe with 3/4-in. thread on one and 1.5-in thread on the other side. This part is not available through Cisco though.

Another alternative is to use wall mount with 1.5-in thread, i.e. Pelco SWM-GY or IWM-GY.

Regards,

Gregor