cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
211
Views
0
Helpful
7
Replies
Kavinen Munisamy
Beginner

CISCO ASA 5505 freezing

Hello Guys, I have a CISCO ASA 5505 for my home lab. I accidentally deleted the software. But fortunately I have the IOS .
I did a TFTP on ROMMON Mode and could manage to load the software on the ASA but it stuck as below. Waited for more than 30mins but no chance. I even changed the Compact Flash, still same.
would appreciate if someone could give me an idea how to recover it back

Thanks in advance.

 

.................................................................................................................

Copyright (c) 1996-2011 by Cisco Systems, Inc.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

 

7 REPLIES 7
balaji.bandi
VIP Expert

Looks like the one you loaded OS may be corrupted, get another copy from Google and try

 

Post complete output from boot to loading image ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help

Thanks for reverting back to me.
I Tried several OS: asa924-10-k8.bin , asa805-k8.bin but still having same issue.

 

find attached txt file.

we do not see that attachment check and post, is this document cover complete boot.

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help

Appologize, please find attached .txt file

 

 

I see couple of issue, not sure which can solve your issue, so follow below thread and procedure to fix (if you can)

 

mount: mounting /dev/hda1 on /mnt/disk0 failed: No such file or directory
mount: mounting /dev/hda1 on /mnt/disk0 failed: No such file or directory

 

https://community.cisco.com/t5/network-security/cisco-asa-5505-not-able-to-access-flash/td-p/2382273

i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR

Follow below thread :

 

https://community.cisco.com/t5/network-security/is-my-asa-5505-dead/td-p/1519910

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help

Unfortunately, after reading the article it arrived to an end that probably the Cisco ASA hardware is faulty itself.
Thanks anyways.

i know it unfortunate, looks like you trying to use for Lab, you get plenty on ebay for couple of bugs (i have in my waste rack 3 brand new, never used, got a gift from vendors).

 

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help

Content for Community-Ad