10-08-2011 12:17 PM
dears:
i have new CPAM, and i try to access it through my laptop, but no response? i know the default CPAM IP address is 192.168.1.2.
on other hand i need the command to access cpam .
thx
smadi
10-08-2011 05:39 PM
Hi Smadi,
Make sure you are connecting with a straight-through or crossover cable to eth0 on the CPAM server, and that you are addressing the server via https://192.168.1.2. The server should respond and permit login via
cpamadmin : cpamadmin.
I hope that helps,
Jim
10-09-2011 09:30 AM
dear :
I already do it, without any response? can i format it?
thank you.
smadi
10-15-2011 12:22 PM
dear all:
i solve the problem by format the CPAM again by using the CPAM CD, it will make CPAM as default.
thank you.
smadi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide