10-26-2013 10:15 AM
hello,all:
I encounter this question:I hava one MSP-2RU Server.After initial setup wizard with IP address configed as 10.10.10.1 and media server,operations manager(7.0) located in one server. But the custom require to modify IP to 192.168.10.X. I didn't find out the way after read some documents.I'll appreciate your help!
10-26-2013 10:37 PM
hello.
You can try do this on server with yast ( if you use suse).
Or read this http://www.cyberciti.biz/faq/linux-change-ip-address/
10-27-2013 09:19 AM
There are two options to change the IP address of an existing server.
1) Download the recovery software, do a factory, and start fresh. This method is destructive.
2) Remove the media server from the VSOM, stop services, do system-config-network-tui command and modify the IP address, start services. If necessary do a reboot so the interface starts using the new IP. Add the media server to the VSOM again. This method gives you the option of retaining video and settings.
I have not done option 2 on a co-located VSOM/VSMS however. In that scenario you might need to update the IP address on the VSMC page as well.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide