10-15-2009 06:26 AM
Hi!
I have successfully installed all needed components of the VS suite (VSOM, VSMS and VSVM) after that I have successfully configured 4 cameras. I can see previews on the Camera pages, but when I try to view cameras using Operator Page, I receive just "connection failed" message instead of picture. What may be wrong?
10-15-2009 07:03 AM
Make sure you are using the admin user when connecting to the Cisco Cameras.
10-15-2009 07:33 AM
I use Axis cameras and video stream from them is available in Admin pages, but unavailable on Operator Page.
I use root account to login to Operator Page.
10-15-2009 01:45 PM
Check the IMS log by doing the following commands at the CLI.
Check streaming.
/etc/init.d/cisco status
/usr/BWhttp/logs ls
Tail -f ims.log
10-18-2009 10:47 PM
Thank you, John, I have already found this useful log in /usr/BWhttp/logs. According to this log, there is no problems at the server's side. So, I decided to check the client side and I found, that the client PC has no DirectX drivers installed. I have downloaded and installed new drivers and all worked fine.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide