I am having problem with Synchronizing NTP with VSOM / VSMS 7. They are co-located, and I have configured NTP both on Core Switch and a Server and pointing the VSMS to those IP, but still I am receiving error regarding the time difference.
For co-located server the NTP server is added in management console under system setup-> date and time. make sure you have enter the correct IP here for your NTP server running on switch. can you post your NTP setting on switch for me to have a look if this is correct.
Do we have any document around ISE 3.0 agentless posture. Techzone type document with steps.
Besides, where can we download agentless posture module? Is it only available to download from ISE admin GUI, or is it available at CCO?
Hi, We are getting below Alarm on ISE frequently. we verified COA enabled on WLC and there is no impact on users as we didnt receive any complain from users. Dynamic Authorization Failed for Device : Server=ISE-1; Network Device Name=WLC WLC Firmware = 8....
the Cisco CPN Client for a long time to connect to a VPN Server. Now I've got a new machine with a Windows 7 64 bit. The Cisco VPN Client isn't avaiable in a 64 bit version. Cisco suggests to use Cisco AnyConnect instead because there'a 64 bit version ava...
May 2016Splunk is a powerful tool for analyzing information in your organization by collecting, storing, alerting, reporting, and analyzing machine data. With Cisco platform Exchange Grid (pxGrid) Splunk is able to proactively act on received network secu...
Happy to announce that we have an updated version of our Enabling AMP on Content Security Products - Best Practices (v3.0). Please feel free to review if you have questions regarding deployment of AMP (File Reputation and File Analysis).