AAA authentication

[robin.disla]

I have configured AAA in my cat 9500 switches but while the service is active the switch does not allow me to use the local credentials of the equipment only those used by the active directory as I can do to enter with both local options as active directory with the active service.

[gbekmezi-DD]

Please share the relevant configuration. You have to make sure you have local authentication as an allowed method if you want local authentication to be allowed.


George

[Jaderson Pessoa]

please, share configuration about your AAA authentication.

[robin.disla]

I want to be able to authenticate with my AD and local user at the same time even if the service is active.

My current config is

aaa authentication login default group IAS local
aaa authentication login userAuthentication local group IAS
aaa authorization console
aaa authorization exec default group IAS local if-authenticated
aaa authorization exec userAuthorization local group IAS if-authenticated
aaa authorization network userAuthorization local group IAS
aaa accounting exec default start-stop group IAS
aaa accounting system default start-stop group IAS

[gbekmezi-DD · Accepted solution]

aaa authentication login userAuthentication local group IAS
to
aaa authentication login userAuthentication local group IAS local

[Jaderson Pessoa · Accepted solution]

dont forget to add local with the last authentication in your AAA authentication.

[robin.disla]

thanks the problem was solved.