cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

166
Views
0
Helpful
1
Replies
Highlighted
Beginner

Account renew problem in ACS..

Hi,

I am using ACS for Authentication for Access-server. I am using RADIUS for authentication. Now If the user is connected and it has a 1 hours time remaining in his account. Now if this user is authenticate and use the services, and between this if I renew his account and increase the available time from 1 to 60 hours. Now this user autometically disconnected after 1 hour and he has to login back to get his new login creditintial. How can I fix this problem. I don’t want to disconnect the user and I want to change his login credentials and It should apply at the same time. How can I fix this problem?

Thanks,

Banno

1 REPLY 1
Contributor

Re: Account renew problem in ACS..

As far as my knowledge goes, if the user is authenticated and using the services, during which you reniew his account, inevitably it has to take effect only during next login. This I believe is a security feature.