cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

321
Views
0
Helpful
0
Replies
Highlighted
Explorer

acs 4.2, Agentless host issue

With ACS 4.2, i want to enable Agentless host,   but it is not working and when i run Debuging on cisco switch i get the following messages on switch,  it is not detecting the agentless-host mac-add.  just showing   0000.0000.0000 as mac-add of the host

please help me what is the issue------

01:48:07: dot1x-registry:dot1x_port_linkchange invoked on interface FastEthernet0/3
01:48:07: dot1x-registry:dot1x_port_linkcomingup invoked on interface FastEthernet0/
3
01:48:07: dot1x-ev:dot1x_port_enable: set dot1x ask handler on interface FastEtherne
t0/3
01:48:07:     dot1x_auth Fa0/3: initial state auth_initialize has enter
01:48:07: dot1x-sm:Fa0/3:0000.0000.0000:auth_initialize_enter called
01:48:07: dot1x-ev:auth_initialize_enter:0000.0000.0000: Current ID=0

01:48:07:     dot1x_auth Fa0/3: during state auth_initialize, got event 0(cfg_auto)
01:48:07: @@@ dot1x_auth Fa0/3: auth_initialize -> auth_disconnected
01:48:07: dot1x-sm:Fa0/3:0000.0000.0000:auth_disconnected_enter_action called
01:48:07: dot1x-sm:
dot1x_update_port_status called with port_status = DOT1X_PORT_STATUS_UNAUTHORIZED
01:48:07: dot1x-ev:dot1x_port_cleanup_author: cleanup author on interface FastEthern
et0/3
01:48:07: dot1x-ev:dot1x_update_port_status: Called with host_mode=0 state UNAUTHORI
ZED

01:48:07: dot1x-ev:dot1x_update_port_status: using mac 0000.0000.0000 to send port t
o unauthorized on vlan 0

01:48:07: dot1x-ev:Found a supplicant block for mac 0000.0000.0000 E6B704

01:48:07: dot1x-ev:dot1x_port_unauthorized: Host-mode=0 radius/guest vlan=0

01:48:07: dot1x-ev:    GuestVlan configured=0

01:48:07: dot1x-ev:supplicant 0000.0000.0000 is default

01:48:07: dot1x-ev:supplicant 0000.0000.0000 is last

01:48:07: dot1x-ev:dot1x_port_cleanup_author: cleanup author on interface FastEthern
et0/3
01:48:07:     dot1x_auth Fa0/3: idle during state auth_disconnected
01:48:07: @@@ dot1x_auth Fa0/3: auth_disconnected -> auth_connecting
01:48:07: dot1x-sm:Fa0/3:0000.0000.0000:auth_connecting_enter called
01:48:07:     dot1x_bend Fa0/3: initial state dot1x_bend_initialize has enter
01:48:07: dot1x-sm:Dot1x Initialize State Entered
01:48:07:     dot1x_bend Fa0/3: initial state dot1x_bend_initialize has idle
01:48:07:     dot1x_bend Fa0/3: during state dot1x_bend_initialize, got event 16383(
idle)
01:48:07: @@@ dot1x_bend Fa0/3: dot1x_bend_initialize -> dot1x_bend_idle
01:48:07: dot1x-sm:Dot1x Idle State Entered
01:48:07: dot1x-ev:Created port supplicant block 0000.0000.0000 expected_id=0 curren
t_id=0

01:48:07: dot1x-ev:dot1x_init_sb_oper_info:Default port supplicant at memloc E6B704

01:48:07: dot1x-ev:dot1x_post_message_to_auth_sm: cleanup author from interface Fast
Ethernet0/3
01:48:07: dot1x-ev:
dot1x_post_message_to_auth_sm:0000.0000.0000: Sending TX_FAIL

01:48:07: dot1x-ev:dot1x_post_message_to_auth_sm:0000.0000.0000: Current ID=1

01:48:07: dot1x-ev:dot1x_tx_eap: EAP Ptk
01:48:07: dot1x-ev:EAP-code=FAILURE
01:48:07: dot1x-ev:EAP Type= IDENTITY
01:48:07: dot1x-ev:ID=0

01:48:07: dot1x-registry:registry:dot1x_ether_macaddr called
01:48:07: dot1x-ev:dot1x_post_message_to_auth_sm: cleanup author from interface Fast
Ethernet0/3
01:48:07: dot1x-ev:dot1x_post_message_to_auth_sm: Tx for req_id for supplicant 0000.
0000.0000

01:48:07: dot1x-ev:dot1x_tx_eap: EAP Ptk
01:48:07: dot1x-ev:EAP-code=REQUEST
01:48:07: dot1x-ev:EAP Type= IDENTITY
01:48:07: dot1x-ev:ID=1

01:48:07: dot1x-registry:registry:dot1x_ether_macaddr called
01:48:07: %LINK-3-UPDOWN: Interface FastEthernet0/3, changed state to upe
01:48:07: %SYS-5-CONFIG_I: Configured from console by vty0 (192.168.2.6)
01:48:37: dot1x-sm:Fa0/3:0000.0000.0000:dot1x_process_txWhen_expire called
01:48:37:     dot1x_auth Fa0/3: during state auth_connecting, got event 18(txWhen_ex
pire)
01:48:37: @@@ dot1x_auth Fa0/3: auth_connecting -> auth_connecting
01:48:37: dot1x-sm:Fa0/3:0000.0000.0000:auth_connecting_connecting_action called
01:48:37: dot1x-ev:dot1x_post_message_to_auth_sm: Tx for req_id for supplicant 0000.
0000.0000

01:48:37: dot1x-ev:dot1x_tx_eap: EAP Ptk
01:48:37: dot1x-ev:EAP-code=REQUEST
01:48:37: dot1x-ev:EAP Type= IDENTITY
01:48:37: dot1x-ev:ID=1

01:48:37: dot1x-registry:registry:dot1x_ether_macaddr called

Everyone's tags (4)