Hello,
Am having trouble with Cisco ATA device when port are configured to use ACS.
When i activate the needed parameter on the port, the ATA device ( voice Vlan ) stop responding to ping.
i need to remove the config and then the device replys to ping but the web interface is still not working, i need to power off the device.
Is there something special to do for port with a ata186 connected to it? any doc?
this is the conf on the port:
switchport mode access
switchport access vlan 175
authentication event fail action authorize vlan 175
authentication event no-response action authorize vlan 175
authentication port-control auto
authentication periodic
authentication violation protect
authentication timer reauthenticate 3600
dot1x pae authenticator
dot1x timeout quiet-period 5
dot1x timeout server-timeout 15
dot1x max-req 10
dot1x max-reauth-req 10
dot1x timeout auth-period 60
The ATA info:
| S/W Version | 3.02.04(090202A) |
| H/W Version | 0x0010 0x0000 |
| Serial Number | INM09061MYC |
| Product ID | ATA186I1-A |
| H/W Features | 0x00000016 |
| Firmware | ATA030204SCCP090202A.zup |
| VLAN ID | 100 |
| Config File | ata001360399037 |
