10-30-2012 07:57 AM - edited 03-10-2019 07:44 PM
Dear guys,
I'm trying to setup Cisco ACS (5.1.0.44) in VMware work station for a testing/study purpose. Installation went fine. I can login through SSH, but GUI login failed with the same credential. Please find the attached images.
Any help will be highly appreciated!!
_______________________________________________
login as: admin
Using keyboard-interactive authentication.
Password:
Last login: Tue Oct 30 17:31:24 2012
ACS-LAB/admin# show running-config
Generating configuration...
!
hostname ACS-LAB
!
ip domain-name testlab
!
interface GigabitEthernet 0
ip address 10.10.10.50 255.255.255.0
!
ip name-server 8.8.8.8
!
ip default-gateway 10.10.10.254
!
clock timezone UTC
!
!
username admin password hash $1$HRi10i.R$LHqyKJWVqDxfrcmaWGPOM1 role admin
!
service sshd
!
password-policy
lower-case-required
upper-case-required
digit-required
no-username
disable-cisco-passwords
min-password-length 6
!
logging localhost
logging loglevel 6
!
cdp timer 60
cdp holdtime 180
cdp run GigabitEthernet 0
!
icmp echo on
!
ACS-LAB/admin#
__________________________________________________________________________-
Thanks.
Solved! Go to Solution.
10-30-2012 09:30 AM
Hi there,
The first time you access the ACS GUI you need to use the default credentials:
Username: acsadmin
Password: default
After this the server will ask you to change the password. Please give it a try and let me know how it goes.
10-30-2012 09:30 AM
Hi there,
The first time you access the ACS GUI you need to use the default credentials:
Username: acsadmin
Password: default
After this the server will ask you to change the password. Please give it a try and let me know how it goes.
10-30-2012 02:29 PM
It works fine!! Thanks for your time.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: