03-04-2011 02:01 PM - edited 03-10-2019 05:53 PM
Hello, I'm trying to synch time in an ACS 5.1 but after configuring with the ntp server command the show ntp command displays that time is synchronised to local net at stratum 11.
The ntp source is a Windows 2003 server and the show ntp command shows that it has an external refid with at stratum 2, but still the ACS won't synchronize with this source, only local.
Have any of you seen this issue?
Thanks,
Alex
03-05-2011 06:10 AM
Hi ,
Please check the timezone on the acs server and make sure it is same as AD server. Use command "show timezones" to get the list of timezones.
Regards,
~JG
Do rate helpful posts
03-10-2011 08:07 AM
Thanks for the response Jagdeep,
I had already changed the TZ, for some reason I don't know after I stopped ACS service and added the ntp server command again the clock synchronized OK. I say I have no idea how it worked as I did this a couple of times the previous day. I'm guessing there was an issue with the NTP server (it's a windows 2003 server).
Regards,
Alex
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide