cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3041
Views
5
Helpful
4
Replies

ACS 5.1 PEAP Certificate Help

bridgeboe
Level 1
Level 1

Currently trying to configure 802.1x using PEAP for wireless access.  I haven't done this since using ACS 3.3 and I'm lost inregards to the certificate installation and all that good stuff.

The setup is currently working with LEAP and EAP-FAST.

The CA is a Windows 2003 Server.

Thank you,

Ed

4 Replies 4

Are you having problems installing the certificate?

Certificates are installed under System Administration -> Local Server Certificates -> Local Certificates

Michael Lee
Level 1
Level 1

Hi,

I'm in the same boat, I haven't worked with ACS since verison 3.3, I'm trying to configure PEAP authentication, for our wireless environment.

  1. I haven't found any decent documentation about the certificate process and if it's best to use either self signed or a certificate signed by a root CA?
  2. I have configured LDAP integration but I not sure whats next.

We are using the ACS platform for both 802.1X, Internal RADIUS and TACACS, both the RADIUS and TACACS authentication are working.

Does any have any good documentation, or links to on the configuring PEAP authentication?

Regards,

Mike

Guys,


This might help. This was created for PEAP-GTC, you may select PEAP-MSchap v2.


PEAP-Self-Signed2.doc


Regads,

JK


Do rate helpful posts-


~Jatin
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: