cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1719
Views
4
Helpful
6
Replies

ACS 5.1 Upgrade path

fessehatsegaye
Level 1
Level 1

Hello,

I have a just unpacked ACS1121 with 5.1.0.44.. ACS software version. Is there any procedure (upgrade path) to upgrade this to a 5.2.x version ( the latest

5-2-0-26-5) ??

1 Accepted Solution

Accepted Solutions

jrabinow
Level 7
Level 7

Are you using a tftp repository. If so try with an ftp repository

View solution in original post

6 Replies 6

I tried to upgrade ACS5.1.0.44 to ACS 5.1 using the ACS_5.2.0.26.tar.gz upgrade package. I essued the upgrade using 'application upgrade ACS_5.2.0.26.tar.gz myrepository_name' command.But the upgrade starts and fails with the message "Manifest file not found". I have checked that the manifest.xml exists in the upgrade package. What could be wrong?

Please help!!!

jrabinow
Level 7
Level 7

Are you using a tftp repository. If so try with an ftp repository

Yes I am using a tftp repository.

I will let you know the result after I checked it with ftp repository.

Yes FINALLY it worked using ftp repository!!! Cisco team please fix the tftp problem.

Final solution to upgrade from ACS 5.1 to 5.2 :

  • Use ACS_5.2.0.26.tar.gz upgrade package
  • use the command 'application upgrade ACS_5.2.0.26.tar.gz myrepository_name' and use only ftp repository
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: