01-05-2010 10:47 AM - edited 03-10-2019 04:52 PM
Is upgrade for CSACSE-1113-K9 appliance running 4.2.0.124 to 5.1 supported?
Solved! Go to Solution.
01-05-2010 11:09 AM
I don't believe that will happen, unless a new Hardware Upgrade Kit is created, look at this for the System memory comparison:
ACS 4.2:
ACS 5.1
Also a new DVD would need to be developed since ACS Appliance Versions are hardware specific...I suppose is not impossible to use the same HW, but I haven't heard of any near plans to occur.
Now keep in mind that the upgrade from ACS 4.X to 5.X is consider a full Migration...lots of differences in the way you manage your Clients, Users, Policies...
HTH.
01-05-2010 10:52 AM
This is not supported...ACS 4.2 can be installed on 1120 with a downgrade...
Note: ACS 5.0 is not supported on 1113 HW.
HTH.
01-05-2010 11:00 AM
Are there plans from Cisco to provide upgrade path from 4.2 to 5.x for 1113 HW?
01-05-2010 11:09 AM
I don't believe that will happen, unless a new Hardware Upgrade Kit is created, look at this for the System memory comparison:
ACS 4.2:
ACS 5.1
Also a new DVD would need to be developed since ACS Appliance Versions are hardware specific...I suppose is not impossible to use the same HW, but I haven't heard of any near plans to occur.
Now keep in mind that the upgrade from ACS 4.X to 5.X is consider a full Migration...lots of differences in the way you manage your Clients, Users, Policies...
HTH.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: