12-14-2012 06:34 AM - edited 03-10-2019 07:53 PM
Hi!,
I'm having a issue when configuring Cisco ACS 5.2 appliance 1121 to integrate windows 2000 Active Directory as an External Users Database.
I'm using an account with administrator privileges on AD (can create computer objects).
The ACS register itself successfully to the domain but it doesn't retrieve the AD Groups, even when i change the seach base and filter.
At this link says that ACS supports AD over Windows 2003, 2008 and 2008R2 but it doesnt say that not supports Windows 2000.
If someone can confirm if AD 2000 isn't supported or have the solution i'll apreciate your help
Solved! Go to Solution.
12-14-2012 08:58 AM
This is not supported, when ACS attempts to join the domain it needs to know which version the domain controller is at along with the functional level of the domain. Please reference the following guide on how to troubleshoot this issue for you reference and maybe you can try to get this to work on your own, however you will be entitled for support based on the information you provided.
https://supportforums.cisco.com/docs/DOC-26787
Tarik Admani
*Please rate helpful posts*
12-14-2012 08:58 AM
This is not supported, when ACS attempts to join the domain it needs to know which version the domain controller is at along with the functional level of the domain. Please reference the following guide on how to troubleshoot this issue for you reference and maybe you can try to get this to work on your own, however you will be entitled for support based on the information you provided.
https://supportforums.cisco.com/docs/DOC-26787
Tarik Admani
*Please rate helpful posts*
12-27-2012 06:24 AM
Hi Tarik,
Thanks for your help!!
It works, but i had to add the AD groups manually on the ACS, i mean ex. domain.com/groups/users. and Click ADD on the Directory Groups Window.
Hope it helps someone else!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: