cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1100
Views
5
Helpful
3
Replies

ACS 5.2 PEAP with Machine Authentication

mross1572
Level 1
Level 1

Can someone point me in the direction of a good guide for configuring PEAP with Machine Authentication to allow for domain login?

This is a clean install on a new 5.2 install.

We are moving from 4.X to 5.2 and i want to make sure i dont miss anything.

Thank you in advance for any assistance.

Basics of infrastructure;

  • 440X's & 5508's
  • ACS 5.2 VMWare
  • AD is being used as the external database for the PEAP and Machine Auth.
1 Accepted Solution

Accepted Solutions

rroulhac
Cisco Employee
Cisco Employee

This link might help.  Let me know if this is what you are looking for.  It is not the exact set up you are using but should be a great guideline.

http://wnbu-press.cisco.com/files/2010/09/CUWN_PEAPv1.pdf

Grace and Peace,

Robert E Roulhac Jr

View solution in original post

3 Replies 3

rroulhac
Cisco Employee
Cisco Employee

This link might help.  Let me know if this is what you are looking for.  It is not the exact set up you are using but should be a great guideline.

http://wnbu-press.cisco.com/files/2010/09/CUWN_PEAPv1.pdf

Grace and Peace,

Robert E Roulhac Jr

Unfortunately I cant seem to download that file, the site isn't responding.

Do you happen to have a local version you could attach?

MROSS,

If you send me an email at rroulhac@cisco.com i will forward you a doc.

Robert

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: