ACS 5.3 for Wireless Authentication using Radius

[cpratt]

Does anyone have a good walkthrough on how to setup ACS 5.3 to authenticate wireless users over radius? I currently have the SSID pointing to a Microsoft IAS server and would like to move the authentication to be done via ACS.

Thanks,

Chris         

[Amjad Abdullah]

If you are using active directory then this is a good doc

https://supportforums.cisco.com/docs/DOC-21679

If you use internal user DB you need to choose the local user identity rather than the AD identity.

HTH

Amjad

Sent from Cisco Technical Support iPad App

[kamlenegi]

Hi,

This is my first time to login into Cisco support community. I am facing ACS authentication issue in IPAD, if someone can help to resolve this.

Issue: IPAD is not authenticating from ACS Internal user database.

Requirement: IPAD user's authentication should be from ACS 5.3 Internal user database.

Current Configuration: Domain user's are authenticating from AD as a machine authentication, using PEAP (MSCHAP-V2). I have configured access policy for domain users. Due this configuration domain user's can login into  IPAD also which we don't required. I do not understand why IPAD is using PEAP (MSCHAP - V2) while it is not a domain system. Can any one suggest how to block IPAD authentication from AD and should authenticate from ACS local user database.

Thanks

Kamlesh Negi 

[Naveen Kumar]

please refer the configuration guide:

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44844-leapserver.html