cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

328
Views
0
Helpful
4
Replies
Beginner

ACS 5.4 unknown report admin account "webview" in GUI

I believe that this account is created by ACS automatically but would like confirmation of that and if anyone knows what it is used for and whether it is safe to disable/remove or not.

Thanks for any help that you might be able to offer.        

Everyone's tags (2)
4 REPLIES 4
Cisco Employee

ACS 5.4 unknown report admin account "webview" in GUI

As far as I know there is no default account called webview.

The first time you log in to ACS 5.4, you are prompted for the predefined administrator username (ACSAdmin) and required to change the predefined password name (default). After you change the password, you can start configuring the system.

Do you see any task/activity performed by this user under administration audits.

For more information:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/admin_admin.html#wp1068520

Jatin Katyal
- Do rate helpful posts -

~Jatin Katyal
Beginner

ACS 5.4 unknown report admin account "webview" in GUI

no activity seen in the audits, but none of our 4 admins of the ACS system recall creating that userid so we were curious if others had that ID in their systems too.  Our audit team was asking us where it came from and why it was there.  One possible thought was something to try to tie ciscoview in Prime in with ACS report admin functionality. 

Cisco Employee

ACS 5.4 unknown report admin account "webview" in GUI

May be you guys created it as a service account while integrating the acs view with prime infrastructure. You may check/validate the same by going to Prime > configure > edit ACS view server and check if the same account being used there for integration.

Jatin Katyal
- Do rate helpful posts -

~Jatin Katyal
Highlighted
Beginner

Re: ACS 5.4 unknown report admin account "webview" in GUI

Agree with Jatin. The only defaul admin account is "acsadmin."

Sent from Cisco Technical Support iPhone App