02-02-2010 01:41 AM - edited 03-10-2019 04:55 PM
we are trying to set up Cisco Secure ACS (5.0) which will automatically allocate unknown users to a Guest Vlan. 802.1X is configured on the switches but our lack of undersatnding of the ACS prevents us completing this task. I am aware that we need to configure radius even though we want Microsoft AD to do the authentication but we do not know the correct procedure - any assistance would be appreciated
Solved! Go to Solution.
02-02-2010 02:01 AM
we are trying to set up Cisco Secure ACS (5.0) which will automatically allocate unknown users to a Guest Vlan. 802.1X is configured on the switches but our lack of undersatnding of the ACS prevents us completing this task. I am aware that we need to configure radius even though we want Microsoft AD to do the authentication but we do not know the correct procedure - any assistance would be appreciated
Hi,
Check out the below link on 802.1x configurtaion in switches along with ACS configuration,hope that help !!
http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_example09186a00808abf2d.shtml -- 802.1x switch and ACS configuration
If helpful do rate the post
Ganesh.H
02-02-2010 02:01 AM
we are trying to set up Cisco Secure ACS (5.0) which will automatically allocate unknown users to a Guest Vlan. 802.1X is configured on the switches but our lack of undersatnding of the ACS prevents us completing this task. I am aware that we need to configure radius even though we want Microsoft AD to do the authentication but we do not know the correct procedure - any assistance would be appreciated
Hi,
Check out the below link on 802.1x configurtaion in switches along with ACS configuration,hope that help !!
http://www.cisco.com/en/US/tech/tk389/tk814/technologies_configuration_example09186a00808abf2d.shtml -- 802.1x switch and ACS configuration
If helpful do rate the post
Ganesh.H
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: