cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

660
Views
5
Helpful
1
Replies
Beginner

ACS Migration from 4.2 to 5.3(latest)

Hi all,

If we need to migrate ACS 4.2 installed on appliance 1113 to ACS 5.3 what all the prerequisites...?

whether any hardware dependencies and the same configurations on 4.2 could be operated on 5.2 even after appliance changes...?

Thanks for your suggestions in advance..

1 REPLY 1
Cisco Employee

ACS Migration from 4.2 to 5.3(latest)

Hello vishweswaran K,


You cannot migrate from 1113 Appliances directly, so you need to back-up the data from the appliance, set up a migration machine (windows server for ACS install), install the a supported migrated version. Restore the data to this windows ACS. Migrate from this box to ACS 5 (VM or Appliance). More info: http://tools.cisco.com/squish/cd545

ACS 4.x Elements Supported and un-supported in the Migration Process. Whole list is available for your review:

http://tools.cisco.com/squish/b97f5

Feature Comparison of ACS 3.x and 4.x with ACS 5.3

http://tools.cisco.com/squish/77447

Troubleshooting the Migration utility or process:

http://tools.cisco.com/squish/6C688

Evaluating ACS 5.3 on VMware with trial version:

http://tools.cisco.com/squish/55ce7

You can use a single migration machine for migrating to two ACS boxes.

Base permanent license: 500 devices

Large deployment License: un-limited devices

Regards,

Jatin

Do rate helpful posts-

~Jatin Katyal