07-31-2013 03:52 PM - edited 03-10-2019 08:42 PM
I learned today in my ACS 5.x course of an ISE module that would allow an ACS appliance 5.x that would convert, if that is the right word, the ACS appliance to ISE. Is this correct? is there more information about this?
07-31-2013 04:35 PM
Hi David,
I guess you're looking for more information to migrate ACS 5.x to ISE. If that is correct, you may follow the doc's mentioned below.
Cisco Secure ACS 5.1/5.2 to Cisco ISE 1.1 Migration Overview
http://www.cisco.com/en/US/docs/security/ise/1.1/migration_guide/ise_mig_overview.html
~BR
Jatin Katyal
**Do rate helpful posts**
07-31-2013 06:34 PM
If you want to migarte from ACS 5.3 to ISE 1.2, please follow the below link.This guide describes the process for migrating data from a Cisco Secure Access Control System (ACS), Release 5.3 database to a Cisco Identity Services Engine (ISE), Release 1.2, appliance using the Cisco Secure ACS to Cisco ISE Migration Tool.
http://www.cisco.com/en/US/docs/security/ise/1.2/migration_guide/ise_mig_preface.html
08-29-2013 07:04 AM
You can migrate to the latest Cisco ISE release only from the latest ACS 5.x release. You must upgrade to the latest ACS 5.x release before you plan to migrate to the latest Cisco ISE release.
Cisco ISE supports data migration from Cisco Secure ACS 5.1 and 5.2 using the Cisco Secure ACS-ISE Migration Tool. If you are running Cisco Secure ACS 3.x or Cisco Secure ACS 4.x, you must first upgrade to Cisco Secure ACS 5.0.
After you reach the Cisco Secure ACS 5.0 level, you can then upgrade to Cisco Secure ACS 5.1 or 5.2. At this point, you can then migrate to Cisco ISE using the Cisco Secure ACS-ISE Migration Tool.
09-18-2013 06:26 PM
Hi
Cisco Secure ACS and Cisco ISE exist on different hardware platforms and have different operating systems, databases, and information models. Therefore, you cannot perform a standard upgrade from Cisco Secure ACS to Cisco ISE. Instead, the Cisco Secure ACS to Cisco ISE Migration Tool reads data from Cisco Secure ACS and creates corresponding data in Cisco ISE.
For more information about migration tool and configuration, please go through this link:
http://www.cisco.com/en/US/docs/security/ise/1.2/migration_guide/ise_mig_data.html
09-20-2013 06:07 AM
You cannot migrate to Release 1.2 from Cisco Secure ACS 4.x or earlier versions, Cisco Secure ACS 5.1 or 5.2, or from Cisco Network Admission Control (NAC) Appliance.
You can directly migrate to Cisco ISE, Release 1.2 only from Cisco Secure ACS, Release 5.3. From Cisco Secure ACS, Releases 4.x, 5.1, and 5.2, you must upgrade to ACS, Release 5.3 and then migrate to Cisco ISE, Release 1.2.
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_preface_00.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: