cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
The ISE 2.5 Beta software is now available! Join the ISE Beta Community to try it in your lab!
177
Views
0
Helpful
2
Replies
Beginner

ACS4.1 not responding

hi,

currently i want to authenticate 2960 switch to ACS4.1..(i already tested the configuration in VMWare and is successful)..but on runing environment when i enter the username and password on switch the ACS shows that the authentication is succesful ("Report and activity" button) but the switch is showing failed authentication... i used debug aaa authentication...attached file shows the result of the debug..

Regards

Naresh

2 REPLIES
Highlighted
Beginner

Re: ACS4.1 not responding

i also want to tell that ACS 4.1 is a solution engine, ping is unsuccessful, AP is successfully authenticating the user but switch 2960 fails to authenticate and giving the error mentioned above

Regard

Naresh

Re: ACS4.1 not responding

Naresh,

Please increase the radius timeout and that should help.

Regards,

~JG

Do rate helpful posts

CreatePlease to create content
Ask the Expert- MPLS troubleshooting