cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
440
Views
0
Helpful
1
Replies

After ISE 1.2.1 upgrade to 1.4 - I cannot restore the Backup file

dselfridge
Level 1
Level 1

I re-imaged the box, after a hardware failure during an attempted upgrade. (3315 appliance)

Getting the error 'restore failed: Wrong encryption key or corrupted download from repository'

I've tried repo's based on FTP and local disk. all fail.

I've also generated fresh backups from a 'live' v1.2.1 ISE and tried to restore that to my new 1.4 box, but continues to fail.

The encryption key is definitely correct.

any ideas?

Thanks,

Dan

1 Reply 1

Jatin Katyal
Cisco Employee
Cisco Employee

Have you checked the MD5 on the backup file? I came across a post few weeks ago where if you download the file, the MD5 checksum was correct however while transferring the file via FTP it got changed. This seems to little buggy behavior. However SFTP protocol worked.

~ Jatin

~Jatin
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: