cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

45
Views
0
Helpful
0
Replies
Highlighted
Enthusiast

Bundling Cisco ISE ports

Hello,

 

Cisco ISE user guide suggests that all 4 ports can be assigned IP addresses and that's that. No suggestions such as if the all ports should be on different VLANs or if the ports can be bundled, hence saving IP address space. I have read the book by ISE expert Aaron Woland and no suggestions either.

On a Standalone ISE, as soon as I configured Gi1 with a different IP subnet from Gi0, I lost GUI access. So my questions are as follows:

1. Can all 4 ports be bundled

2. If no bundling and all 4 ports are assigned IP addresses, can they be on different IP subnets, whether Standalone or Distributed personas. For example a PSN with 4 ports. Gi0 - 10.0.10.x, Gi1 - 172.16.5.x, Gi2 - 172.16.8.x, Gi - 10.2.5.x

Thanks