cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1856
Views
0
Helpful
2
Replies
Highlighted
Beginner

Check snmp community

Hi,

We are have many cisco devices with enabled snmp.
How i can remote check (whit software) all devices for snmp community - read or write access it?
Thanks.

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Advisor

Re: Check snmp community

you can do couple of steps :

 

1. First scan all the network devices with snmp port 161 open or closed.

2. depends on the results you can use that device to do snmpwalk with read community

3. Same as write community to confirm.

4. compare both the results read and write access.

BB
*** Rate All Helpful Responses ***

View solution in original post

2 REPLIES 2
VIP Advisor

Re: Check snmp community

you can do couple of steps :

 

1. First scan all the network devices with snmp port 161 open or closed.

2. depends on the results you can use that device to do snmpwalk with read community

3. Same as write community to confirm.

4. compare both the results read and write access.

BB
*** Rate All Helpful Responses ***

View solution in original post

Beginner

Re: Check snmp community

Thanks. Will try.