cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

59
Views
0
Helpful
0
Replies
Highlighted
Beginner

Cisco 4510 Not authentication from ACS 5.6

Hi All,

 

Can anyone help me to authenticating Cisco 4510 from ACS 5.6. We are able to authenticate other cisco switches from ACS but not able in Cisco 4510.

 

Configuration command is same for all devices.

 

aaa new-model
!
!
aaa authentication login default group tacacs+ line local
aaa authentication enable default none
aaa authorization console
aaa authorization config-commands
aaa authorization exec default group tacacs+ none
aaa authorization commands 0 default group tacacs+ none
aaa authorization commands 1 default group tacacs+ none
aaa authorization commands 15 default group tacacs+ none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+

 

tacacs-server host xxxxx
tacacs-server host  yyyyyy
tacacs-server directed-request
tacacs-server key xyxyxyxy

CORE01#sh ver

Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 15.0(2)SG10, RELEASE SOFTWARE (fc1)

 

Regard

Kamlesh