09-12-2016 06:35 AM - edited 03-11-2019 12:04 AM
hi Sir
account locked on the ACS 5.8
e.x
Account locked due to 8 failed logins
Solved! Go to Solution.
09-14-2016 02:49 AM
Hi,
Any update so far on password recovery.
Let me know if you have any further questions.
Regards
Gagan
PS: rate if helps !!!!
09-12-2016 03:06 PM
Hi,
Please find password recovery for ACS
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-8/installation/guide/csacs_book/csacs_ins.html#38674
Regards
Gagan
PS : rate it as correct if it helps!!!
09-12-2016 06:31 PM
Hi Sir
I have not found Server CD-ROM,need for external?
09-13-2016 02:53 AM
Hi,
You can make any DVD bootable and burn it with ISO of ACS 5.8
File Name: |
ACS_v5.8.0.32.iso |
https://software.cisco.com/download/release.html?mdfid=286286338&flowid=76642&softwareid=282766937&release=5.8.0.32&relind=AVAILABLE&rellifecycle=&reltype=latest
Regards
Gagan
PS: rate it as correct if it helps!!!
09-14-2016 02:49 AM
Hi,
Any update so far on password recovery.
Let me know if you have any further questions.
Regards
Gagan
PS: rate if helps !!!!
09-13-2016 07:51 AM
Where you running ACS on, a vm or are you using the appliance ie Integrated Management Controller?
VM - you can upload the ISO to your datastore and on the virtual Machine Properties go to CD/DVD drive. Connect at power on, and select the image on your data store.
Then follow as Gagan said
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-8/installation/guide/csacs_book/csacs_ins.html#38674
Integrated Management Controller - Launch KVM Console. Once connected go to Virtual Media.
Then you can connect from your PC's CD or add the image. - Follow recovery process.
Don't disconnect your pc from virtual media as it will kill the session until you are done.
05-15-2022 08:05 AM
We have an ACS physical box. Need to reset the password without resetting the device kindly help me provide the steps.
05-15-2022 09:00 AM
please take a look at: ACS 5.X CLI Password Recovery, special attention to Step-by-Step Procedure (2. Reboot the ACS 5.x).
Hope this helps !!!
06-20-2019 07:47 PM
If we recover the password, the config on the tacacs get lost too?
06-20-2019 08:37 PM
If you follow the documented password reset process and don't rerun the install, then your config will remain untouched.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: