cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
205
Views
10
Helpful
2
Replies
Beginner

Cisco ISE : Can't install URT to prepare upgrade

Hello,

 

I'm planning to upgrade Cisco ISE 2.1 to version 2.6. I'm preparing upgrade by trying to install URT but when I try to install it it keeps saying "% Repository not found" even though I have uploaded it.

 

NLDC3-ISE-MNT/admin# dir disk:/local/

Directory of disk:/local/
  508937949 Jul 17 2019 15:52:12  ise-urtbundle-2.6.0.156-1.0.0.SPA.x86_64.tar.gz

           Usage for disk: filesystem
                124973277184 bytes total used
                50432430080 bytes free
                184817512448 bytes available
NLDC3-ISE-MNT/admin# application install ise-urtbundle-2.6.0.156-1.0.0.SPA.x86_64.tar.gz local
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully

Getting bundle to local machine...
% Repository not found

I even uploaded it at the root but I'm still having same issue.

 

Thank you for your help

Eric NGUYEN

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Engager

Re: Cisco ISE : Can't install URT to prepare upgrade

You need to define a repository named local, if you issue a "show repository local" does it tell you the repo isn't found? You can define a disk: repository from the CLI or GUI.

If you issue a show run, you are looking for this.

!
repository local
url disk:/local/
!

2 REPLIES 2
Highlighted
VIP Engager

Re: Cisco ISE : Can't install URT to prepare upgrade

You need to define a repository named local, if you issue a "show repository local" does it tell you the repo isn't found? You can define a disk: repository from the CLI or GUI.

If you issue a show run, you are looking for this.

!
repository local
url disk:/local/
!

Beginner

Re: Cisco ISE : Can't install URT to prepare upgrade

Oh ok that was a misunderstanding on how it was working.

 

It's good now. Thank you for your help.