cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
588
Views
0
Helpful
4
Replies
Highlighted
Beginner

Cisco TrustSec with WCCP and Load Balancers

I am currently deploying TrustSec in an environment and I am looking for documentation for how to deal with Bluecoat Proxies,  SilverPeak WAN Optimization using WCCP and Citrix NetScaler Load Balancing. I think SGT Caching is answer but looking for other opinions as well as documentation that may show/explain how this works. Has anyone experienced this?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Cisco TrustSec with WCCP and Load Balancers

Derrick,

You are spot on with SGT Caching. That would strip out the SGT while entering the blue-coat proxies or SilverPeak WAN and will coming out would reattach the tag. We don't have specific deployment guide on this. But if you would like I can share a slide with you on Spark.

4 REPLIES 4
Cisco Employee

Re: Cisco TrustSec with WCCP and Load Balancers

Derrick,

You are spot on with SGT Caching. That would strip out the SGT while entering the blue-coat proxies or SilverPeak WAN and will coming out would reattach the tag. We don't have specific deployment guide on this. But if you would like I can share a slide with you on Spark.

Beginner

Re: Cisco TrustSec with WCCP and Load Balancers

Hi Karthik,

Thank You for the fast response. If you have a slide that would really help. I know that this works but I am not able to explain the order of operations to the other engineers. Anything you have would be helpful. So, that slide would be great. Do you need my E-mail address? Thanks!

Cisco Employee

Re: Cisco TrustSec with WCCP and Load Balancers

I checked on Spark but couldn't locate you. Could you provide the email address? I can send that offline.

Beginner

Re: Cisco TrustSec with WCCP and Load Balancers