08-05-2016 01:04 AM - edited 03-10-2019 11:58 PM
How many ISE server can I configure under the command "aaa server radius dynamic-author" in IOS? I'm using a C3560 with 12.2.55 SE10.
08-08-2016 09:14 AM
I believe it is eight (8) but I don't remember the exact number. How many do you need? :)
Thank you for rating helpful posts!
08-08-2016 11:42 PM
Thank you for your reply Neno
I need at least 5 but at this time the config will not let me more than 4.
08-19-2016 05:39 PM
Sorry for the delayed response! I tested this in my lab and I was able to configure way more than 4:
aaa server radius dynamic-author
client 192.168.40.100 server-key 7 xxxx
client 192.168.40.101 server-key 7 xxxx
client 192.168.40.111 server-key 7 xxxx
client 192.168.40.112 server-key 7 xxxx
client 192.168.40.113 server-key 7 xxxx
client 192.168.40.114 server-key 7 xxxx
client 192.168.40.115 server-key 7 xxxx
client 192.168.40.116 server-key 7 xxxx
client 192.168.40.117 server-key 7 xxxx
client 192.168.40.118 server-key 7 xxxx
client 192.168.40.119 server-key 7 xxxx
client 192.168.40.120 server-key 7 xxxx
I am using a 2960-C switch running 15.0(2)SE6
I am guessing this is a software limitation. Thus, I would suggest upgrading one of the switches to the latest recommended 15.x version and then try again.
I hope this helps!
Thank you for rating helpful posts!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: