I'm struggling to enforce role-based permissions between endpoints of the same SGT group when the mapping of the source endpoint is learned through SXP (non-continues SGT support between source and destination). While seeing the SGT mapping from the speaker (3560G, network ingress point) on the listener instance (3560X, network egress point), it seems that the mappings are not taken into account for actual enforcement. The enforcement is working as expected with endpoints connected to either 3560X (continues Trustsec domain). Attached is an overview of the test setup. The SGT used is 10 for both source and destination endpoint. ACL1 (SGACL) is blocking ICMP traffic and permitting all other IP.
As can be seen, the mappings are learned from the 3560G on both 3560X via SXP.
SXP-speaker#show cts role-based sgt-map all Active IP-SGT Bindings Information
IP Address SGT Source ============================================ 172.28.135.152 10 LOCAL 172.28.135.157 10 LOCAL 172.28.135.158 10 LOCAL 172.28.135.159 10 LOCAL 172.28.135.160 10 LOCAL 172.28.135.167 10 LOCAL 172.28.135.171 10 LOCAL 172.28.135.174 10 LOCAL 172.28.135.176 10 LOCAL 172.28.135.183 10 LOCAL
IP-SGT Active Bindings Summary ============================================ Total number of LOCAL bindings = 10 Total number of active bindings = 10
SXP-listener1#sh cts role-based sgt-map all Active IP-SGT Bindings Information
ISE 2.7 Guest Access Management Features
The following document explains the guest features of ISE 2.7. For more detail of what ISE 2.7 has to offer please check the associated documentation.
Auto Login on Sponsor Approval
SymptomsOutage during FTD code upgrade DiagnosisThe FTD code upgrade thru FMC will cause the traffic interruptionSolutionBelow process will upgrade the FTD with no downtime and no traffic interruption.Before the upgrade process:Download the FTD platf...
Process for FTD migration with PolicyAs per Cisco documentation, we have below steps for for de-register and register process. Please follow below steps :Step 1 : Break HA pair and de-register your FTD from FMC (old).Step 2 : Register your primary FTD wit...
Hi There,Is there a relationship between the hardware of the Cisco ASA 5505 FWs (V02) and the 9.x software version? Multiple ASA have been successfully updated with the same software. The ASAs that have been updated without any problems are V06 versi...
Dear Cisco Customers and Partners,
We know that the Cisco Identity Services Engine (ISE) is a critical element of your network security and so stability is of paramount importance. As a result, many of you asked us for a suggested release given sev...