01-22-2015 09:27 AM - edited 03-10-2019 10:22 PM
I have a Empty startup-config file on my ubr7. I need to enable shh so i can ssh to the uBR without being physicaly next to it. Im am told i should enable Radius?. Does anyone have an idea how i can do this?
Solved! Go to Solution.
01-22-2015 12:08 PM
I have never used/configured that particular type of hardware but if it runs Cisco IOS then you can follow this:
http://www.thegeekstuff.com/2013/08/enable-ssh-cisco/
Check it out and let me know if you have any questions
Thank you for rating helpful posts!
01-22-2015 12:08 PM
I have never used/configured that particular type of hardware but if it runs Cisco IOS then you can follow this:
http://www.thegeekstuff.com/2013/08/enable-ssh-cisco/
Check it out and let me know if you have any questions
Thank you for rating helpful posts!
01-22-2015 10:30 PM
It runs IOS cisco software, it should be configured just like any other router for shh.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: