cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
319
Views
0
Helpful
2
Replies

CWA / Flex Connect APs

GRANT3779
Spotlight
Spotlight

Hi All,

Don't know if this is possible, but is there a way to have a Guest connect to an SSID (let's say associated with vlan 99) and once authenticated to then be dynamically associated with a different VLAN or. as I expect they are tied to the VLAN associated with the SSID?

1 Accepted Solution

Accepted Solutions

agrissimanis
Level 1
Level 1

This is referred to as "FlexConnect VLAN Override", supported from code version 7.2.

It is quite straightforward to configure, the only gotcha I guess is that you need to remember to pre-configure the VLANs on the APs beforehand.

Have a look at the branch office deployment guide - http://www.cisco.com/c/en/us/support/docs/wireless/flex-7500-series-wireless-controllers/112973-flex7500-wbc-guide-00.html#override (The same process is applicable to 5508/2504 platforms)

View solution in original post

2 Replies 2

agrissimanis
Level 1
Level 1

This is referred to as "FlexConnect VLAN Override", supported from code version 7.2.

It is quite straightforward to configure, the only gotcha I guess is that you need to remember to pre-configure the VLANs on the APs beforehand.

Have a look at the branch office deployment guide - http://www.cisco.com/c/en/us/support/docs/wireless/flex-7500-series-wireless-controllers/112973-flex7500-wbc-guide-00.html#override (The same process is applicable to 5508/2504 platforms)

This is an interesting read and what I was after I believe. Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: