Does ISE 2.2 support HPE 5130 48G PoE+?

[Irshad Mohammed Hussain]

Guys,

Dose ISE 2.2 Support HPE 5130 48G PoE+ Switch for MAB?

Regards

Irshad

[Francesco Molino]

Hi

Normally it should work but you need to test it.
The device profile should be already there but just in case you can download it here and install it on ise:
https://communities.cisco.com/docs/DOC-70898

[Irshad Mohammed Hussain]

U mean , i have to Import ISE Profile before we start testing  HPE Switch Ports with MAC  Authentication.

[Francesco Molino]

Hi

Normally HPE device profile is already in ISE and if not you have to import first because then when creating your device in ISE you'll need to choose the right device profile