cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

260
Views
0
Helpful
1
Replies
Beginner

EAP-AUTH-AAA-ERROR: Reply received on stale handle

Hi,

I try to deploy 802.1x EAP-TLS in Lab enviroment with ACS 4.2 and

Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(46)SE

If I use the PEAP, it is working, but if EAP-TLS, then nothing show in logs on ACS, but error message.

EAP-AUTH-AAA-ERROR: Reply received on stale handle (0x00000000)

If I switch Network Access Profile to another one w/o EAP-TLS then in log I get

12/10/2009 10:23:21 Authen failed xxx@xxx.xx Default Group XX-XX-XX-XX-XX-XX, other, EAP type not configured

What could be a problem?

1 REPLY 1
Highlighted
Beginner

Re: EAP-AUTH-AAA-ERROR: Reply received on stale handle

Problem was solved by migration of whole ACS to another server with 4.2.0.124 Patch 12.