cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

78
Views
0
Helpful
2
Replies
Highlighted
Beginner

Force or automatic client SSID switching

In ISE 2.0, does it have ability to force a authenticated guest to switch to a different and hidden SSID?

Specifically, a guest user connects to a open SSID and authenticates via CWA using their AD account or sponsor created account, then ISE force it to a hidden guest SSID automatically. Is this possible? or the user need to re-associate to the guest SSID manually?

Everyone's tags (1)
2 REPLIES 2
Cisco Employee

after reading your post this

after reading your post this is the only thing came to my mind with ISE. If you are talking about DUAL SSID wireless byod self registration the please look at the document. With DUAL SSID, user has to manually disconnect and reconnect.

http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_61_byod_provisioning.pdf

HTH

~ Jatin

~Jatin Katyal
Hall of Fame Community Legend

ISE supports 802.1x and VLAN

ISE supports 802.1x and VLAN Switching so, try this:  Configure multiple dynamic interface (and none of them is "attached" to an SSID).  On the SSID, enable "AAA Override".