cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
460
Views
0
Helpful
1
Replies

IP Pool with ACS 4.1

helenio
Level 1
Level 1

Hello,

Description:

- I have an ACSv4.1

- I have 2xNAS configured on ACS as RADIUS IETF

- I have definet IP Poll under System conf -> IP pool Server (start Address & End adress)

- On the Group setup I defined IP-assignement -> Assigned from AAA Server pool -> MyPool1

Problem:

The client get an IP address from the ip poll defined but doing ipconfig on the WINClient the subnet mask is randomly assigned (sometime 255.255.255.240 sometime 255.255.255.255.0)

The client get a DNS that is not specified in the IP Pool ! :-() ..

Quetions

Since in the IP Poll is only defined start address and end address (i.e:10.47.110.32-10.47.110.40)

Why client get random subnet mask, it should be 255.255.255.255 isn't ?

Why there is no definition for Gateway ? Which value gets ?

Clinets get also DNS, Where does this value get from ?

I wuold like also to have the possibility to assign IP from IP poll based on the NAs that relay the AAA request, is that possible ?

1 Reply 1

bwilmoth
Level 5
Level 5

You may try the bug ID CSCse33323