10-06-2009 08:52 AM - edited 03-10-2019 04:43 PM
I am in the process of migrating from ACS 3.3 for Windows to ACS 5.0. Does the ACS 5.0 support IP pols on the box itself? I can't seem to find the option on the box.
Solved! Go to Solution.
10-06-2009 09:56 AM
Hi,
ACS 5.0 and later will not support IP pools for IP address assignment.
You can still assign individual IP addresses using the RADIUS attribute
8, Framed-IP-Address and specific rules. You can have the IP addresses defined in an AD attribute and then use it for assigning the RADIUS attribute.
We recommend instead, to use DHCP for all IP address assignments. DHCP scales much better than what ACS could support.
Regards,
~JG
Do rate helpful posts
10-06-2009 09:56 AM
Hi,
ACS 5.0 and later will not support IP pools for IP address assignment.
You can still assign individual IP addresses using the RADIUS attribute
8, Framed-IP-Address and specific rules. You can have the IP addresses defined in an AD attribute and then use it for assigning the RADIUS attribute.
We recommend instead, to use DHCP for all IP address assignments. DHCP scales much better than what ACS could support.
Regards,
~JG
Do rate helpful posts
10-06-2009 10:02 AM
Thanks,
That's what I thought but couldn't seem to find it in the docs.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: