06-12-2016 05:34 PM - edited 03-10-2019 11:51 PM
Could someone please help with a Guest access setup. I'm trying to complete a setup of a single guest SSID with two central WISM's and a pair of ISE 1.4 to manage a building containing different businesses. The setup works well with a sponsor (business) just picks out the guest that registered but at the end of the implementation the handover brought up an issue that has me stumped. Each business wants to have their own SMS account provider. How do I setup so that the end user sets the location thus the SMS provider?
Solved! Go to Solution.
06-12-2016 07:00 PM
Hi
there are 2 different standalone ise or there are members of the same deployment?
you can add sms gateways on ise settings. Then if there are 2 different deployment, you just have to choose the sms gateway you have created under the guest portal configuration.
if you have only 1 deployment with 2 ise servers, you can create 2 guest portal, on each of them you affect the right sms gateway.
if you have 1 deployment and have the same guest ssid:
- split APs between the 2 businesses by using AP group
- on ise, you can use policy set (more simple and lisible).
- based on AP Group, you can popup 1 guest portal for 1 AP Group and another guest portal for another AP Group. In order to make that working, you will need to modify call station id type under the security tab on the wlc itself.
hope this is clear.
if you have MSE deployed, you can set your rules and popup portal based on physical location without use of AP Group
06-12-2016 07:00 PM
Hi
there are 2 different standalone ise or there are members of the same deployment?
you can add sms gateways on ise settings. Then if there are 2 different deployment, you just have to choose the sms gateway you have created under the guest portal configuration.
if you have only 1 deployment with 2 ise servers, you can create 2 guest portal, on each of them you affect the right sms gateway.
if you have 1 deployment and have the same guest ssid:
- split APs between the 2 businesses by using AP group
- on ise, you can use policy set (more simple and lisible).
- based on AP Group, you can popup 1 guest portal for 1 AP Group and another guest portal for another AP Group. In order to make that working, you will need to modify call station id type under the security tab on the wlc itself.
hope this is clear.
if you have MSE deployed, you can set your rules and popup portal based on physical location without use of AP Group
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide