cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

3136
Views
0
Helpful
3
Replies
Highlighted
Ike Beginner
Beginner

ISE 2.2 - Application error (APP_START)

Hello,

I decided to post this fix after searching online for a solution but could not find one except to rebuild ISE.

 

 

*****Issue***

ISE will not accept any configuration commands, or application start/stop commands even after restarting several times, or waiting for several hours.

 

***Error***

ise01/admin# application start ise

 Waiting up to 20 seconds for lock: APP_START to complete

Database is still locked by lock: APP_START. Aborting. Please try it later

% Error: Another ISE DB process (APP_START) is in progress, cannot perform Application Start at this time

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Ike Beginner
Beginner

Re: ISE 2.2 - Application error (APP_START)

****Solution ****

At the command prompt, enter "application configure ise"

select "[5]Refresh Database Statistics"

select "[19]Exit"

 

This would stop the DB process and allow you to input your commands. I hope this helps.

View solution in original post

3 REPLIES 3
Highlighted
Ike Beginner
Beginner

Re: ISE 2.2 - Application error (APP_START)

****Solution ****

At the command prompt, enter "application configure ise"

select "[5]Refresh Database Statistics"

select "[19]Exit"

 

This would stop the DB process and allow you to input your commands. I hope this helps.

View solution in original post

Highlighted
Beginner

Re: ISE 2.2 - Application error (APP_START)

Tried the above mentioned solution on a 2.2 build to no avail. Any other methods besides wipe and reload? 

 

Selection ISE configuration option
[1]Reset M&T Session Database
[2]Rebuild M&T Unusable Indexes
[3]Purge M&T Operational Data
[4]Reset M&T Database
[5]Refresh Database Statistics
[6]Display Profiler Statistics
[7]Export Internal CA Store
[8]Import Internal CA Store
[9]Create Missing Config Indexes
[10]Create Missing M&T Indexes
[11]Enable/Disable ACS Migration
[12]Generate Daily KPM Stats
[13]Generate KPM Stats for last 8 Weeks
[14]Enable/Disable Counter Attribute Collection
[15]View Admin Users
[16]Get all Endpoints
[17]Enable/Disable Wifi Setup
[18]Reset Config Wifi Setup
[19]Reset Context Visibility
[20]Synchronize Context Visibility With Database
[21]Exit

5
% Error: Another ISE DB process (APP_START) is in progress, cannot perform Refresh Database statistics at this time

Beginner

Re: ISE 2.2 - Application error (APP_START)

Same issue.

 

Ths topic is not resolved.