Ok, so this alarm is coming in repeatedly and is now on my projects list. I get email alerts from the server that list thr NAD IP as the endpoint device and the Endpoint IP address is correct. I've checked the settings and the endpoint is not listed as a NAD in ISE (ver 1.2).
Profiler SNMP Request Failure
Profiler SNMP Request Failure : Server=xxx-xxx-xxx; NAD Address=10.253.124.194; Endpoint IP Address=10.253.124.194
SNMP request times out, or SNMP community/user auth data is incorrect.
Suggested Actions :
Please ensure if SNMP is running on the NAD and verify that SNMP configuration on ISE matches on NAD
*** This message is generated by Cisco Identity Services Engine (ISE) ***
Has anyone seen this come in before?
PS - Why is the IOS for ISE so cut down? Looks like something you would get from an Apple product.
Alarm Name :- Profiler SNMP Request Failure
Alarm Description :- Either the SNMP request timed out or the SNMP community or user authentication data is incorrect.
Alarm Resolution :- Ensure that SNMP is running on the NAD and verify that SNMP configuration on Cisco ISE matches with NAD.
I have this behavior too with an ISE 1.4! It is amazing such an old bug still appears on the latest version of the product. But this is not the only case:
Please follow below CiscoLink:
Profiler SNMP Request Failure
Either the SNMP request timed out or the SNMP community or user authentication data is incorrect.
Ensure that SNMP is running on the NAD and verify that SNMP configuration on Cisco ISE matches with NAD.
Also ensure what snmp version device is using.
I have this issue also. The previous replies do not answer the question, simply restate the confusing alert message and generic alert description from Cisco.
I'm getting this message 20+ times a day, and have verified that the NAD IP that is being reported in the alarm are NOT NADs. They are end clients.
I am having the same issue as well, and there is definitely a duplicating of the NAD and / or Client IP into the respective fields.
In addition, I see Clients bring labeled with the SNMP trap under the "Endpoint" as the source, however when I click on the interface inside the Authentication Monitor it returns with a blank report that only says "SNMP information is not configured for this device in ISE." inside the status field.
I have this issue too. I believe that ISE is actually trying to do an SNMP Query against the IP address of the client instead of the IP address of the NAD.
I ended up opening a TAC case on this. Apparently there's some bug when both SNMP and NMAP profiling are turned on. The TAC engineer had me disable NMAP since we weren't really using it for profiling (as DHCP, RADIUS, SNMP, etc provide much more information and are a higher priority in ISE profiling). Disabling NMAP profiling worked, and the SNMP alerts stopped.
We have the same problem. We've checked ACLs, firewalls, config of the NAD, retyped SNMP variables and so on. but still it comes.....