ISE deployment

[rmrahman0302]

Hi,

I need to deploy ISE on the network for corporate users. I want my users will be switched  from untrusted network ( VLAN)  to trusted network after proper authentication. I want to use authentication based on workstation MAC address and  AD authentication. What should I configure on the policy on the ISE and what should I configure on the switchport. Appreciate your help on this.

Thanks.

[Jim Thomas]

This is open ended. There is a lot to ISE. If you are deploying for the first time, I would highly suggest the ISE course to familiarize yourself with the policies and processing of ISE. 5 days of hands-on and Q&A would provide a long term understanding of the product.

For more info you can check the course out below. I have the labs at version 1.1 and ready for 1.1.1 once the release happens:

http://www.globalknowledge.com/training/course.asp?pageid=9&courseid=16777&country=United+States

Hope it helps,

Jim

[Venkatesh Attuluri]

For AD integration and configuring authentication rule this link will be helpfull

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_06_creating_authc_policies.pdf