cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
551
Views
0
Helpful
2
Replies

ISE Design Arch. VM

Shakeeb AlDari
Level 1
Level 1

i am preparing a security policies for a hotel by implementing ISE VM on c220 TRC#2, shall i use L-ISE-VM-K9= or L-ISE-5VM-K9=, as per my knowledge for ISE design there should be mulitple nodes and redundancy consideration. e.g Admin Node, Monitoring Node, Policy service Node, Inline posture node and redundant ISE.

any suggestion or recommendation for the VM solution.

Thanks,

1 Accepted Solution

Accepted Solutions

Venkatesh Attuluri
Cisco Employee
Cisco Employee

number of ISE VM license you need depends on number of cucurrent endpointsin deployment. if its a standalone deployment and is redundancy is needed then u will be needing 2 L-ISE-VM-K9= . let us know number of

cucurrent endpoints.

View solution in original post

2 Replies 2

Venkatesh Attuluri
Cisco Employee
Cisco Employee

number of ISE VM license you need depends on number of cucurrent endpointsin deployment. if its a standalone deployment and is redundancy is needed then u will be needing 2 L-ISE-VM-K9= . let us know number of

cucurrent endpoints.

Thank you Venkatesh, you supported my points, number of end points are up to 600 end point

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: