10-28-2017 01:47 PM - edited 02-21-2020 10:37 AM
Hello,
I'd like to use pxgrid in an ISE deployment. There are two appliances, configured as primary PAN, and secondary MNT, and the other node is secondary PAN and primary MNT. There are two other appliances configured as PSN.
Where should I enable the pxgrid service on the PSN oder PAN/MNT?
thanks for your advise
Alex
Solved! Go to Solution.
10-28-2017 09:28 PM - edited 10-29-2017 07:28 AM
You can enable the pxGrid persona on either node type.
If your number of pxGrid subscribers is no more than 5, then the PAN/MnT nodes are fine. If you have more than that (up to 15) then use a PSN node (or nodes for HA).
Please refer to Cisco Live presentation BRKSEC-3699 for more details.
10-28-2017 09:28 PM - edited 10-29-2017 07:28 AM
You can enable the pxGrid persona on either node type.
If your number of pxGrid subscribers is no more than 5, then the PAN/MnT nodes are fine. If you have more than that (up to 15) then use a PSN node (or nodes for HA).
Please refer to Cisco Live presentation BRKSEC-3699 for more details.
10-29-2017 07:23 AM
Hi Marvin,
thanks for your advise, my PAN reports already high load from time to time. So I will deploy the pxgrid function to the PSN's.
Have a nice weekend
Alex
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide