ISE QoS options

[Oswin Peters]

I noticed that ISE is not setting the DSCP value for Radius or any other communication.

On our switches we mark RADIUS with DSCP CS6, but the RADIUS accept messages from the ISE PSN’s use CS0 (0000 0000).

Is there an option to mark this traffic on the OS/ISE software? If not when will this feature be available?  I prefer the marking to be done by the OS rather than doing it on the DC switches.

[Mohammed al Baqari]

ISE won't mark QoS and for future support you need to verify this with your
Cisco AM.