09-18-2014 10:11 AM - edited 03-10-2019 10:02 PM
Hello,
I read some document 2 years ago that dynamic VLAN assignment was not possible with Anchored WLANs. Please I would like to know if this is now possible. The network setup would be as follows:
1. Foreign and Anchor WLC (5508) with single SSID for both guest and internal users
2. Cisco ISE 1.2 performing AAA override with VLAN tag based on AD group. Guest will go to VLAN for guest after web authentication.
Please a speedy response would be helpful.
11-14-2014 02:50 PM
It should work, the client should take tagging and dhcp from the anchor
11-16-2014 02:27 PM
Hi grabonlee,
We have been running an anchor with VLAN override for out Guest services. Works well. VLAN needs to be defined on both the anchor and foreign. We are running 7.6.120 code.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: