Hello there...
I'm having problem to configure the AAA server in my PIX506e, when i entered the following command, i can't access the firewall's pdm with correct password.
#aaa-server AuthPIX protocol tacacs+
#aaa-server AuthPIX (inside) host 192.168.1.2 TacacsKey
#aaa authentication http console AuthPIX
#privilege show level 10 command access-list
#privilege configure level 11 command access-list
#privilege clear level 12 command access-list
#username xxx password xxxx privilege xxx
#aaa authorization command LOCAL
#aaa-server AuthOut protocol tacacs+
#aaa-server AuthOut (inside) host 192.168.1.2 authkey
#aaa authentication include telnet outbound 0 0 0 0 AuthOut
#aaa authorization include http outbound 0 0 0 0 AuthOutbound
Here I've attach my configuration for your reference, Is there anything wrong with my config?
thanks for helping cisco beginner
Tonny