Plse...help me on the communicating between CLEAN ACCESS MANAGER and Switch 3560E-24Ps by snmp

[huyen01thpm]

Dear All,

I try to configure in both Clean Access Manager and Switch 3560E-24Ps on SNMP Version 2 protocol but I can't make it working together (For CAM and Switch 3560G-48Ps I can do that). Plse give me any suggestion to solve that problem. All configuration is as below:

AND in Switch 3560E (IOS: c3560e-ipbasek9-mz.122-50.SE2.bin) is configured as follow:

!

ip default-gateway 10.0.0.1

!

snmp-server community scb!@#$%^&*() RW

snmp-server enable traps snmp linkdown linkup

snmp-server enable traps mac-notification change move threshold

snmp-server host 10.0.159.100 scb!@#$%^&*()

!

[Surendra BG]

AM still not able to find what Wireless assistance you need?? Coz this is a Wireless Forum.. please post the same in switching Forum and you can expect the follow up right away!!

Regards

Surendra

[Leo Laohoo]

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/412/cam/412_cam_book.html

[Vinay Sharma]

Hi Huyen,

this is a wireless Forum and your issue is related to NAC. So moving this to AAA forum for faster response.

thanks,

Vinay