cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
499
Views
10
Helpful
3
Replies
Highlighted
Beginner

 radius-server question for ws-3850 switch

I'm putting my ssh configuration on a cisco 3850 switch IOS is 03.03.02SE…………….but when  put in the following command?

 

  • radius-server host server-1 auth-port 1645 acct-port 1646 key XXXXXXXXXX

it get this notification:

Switch(config)#radius-server host server-1 auth-port 1645 acct-port 1646 key 123456

Warning: The CLI will be deprecated soon

'radius-server host server-1 auth-port 1645 acct-port 1646 key 123456'

Please move to 'radius server <name>' CLI.

 

What does this mean?..............and what is the correct way for me to put this command in?....

3 REPLIES 3
Rising star

It indicates the newer IOS

It indicates the newer IOS version would not support that command , new command would be " radius server name "

Enthusiast

just to share: If you have

just to share:

  • If you have configured an IPv4 RADIUS server, you can use either the radius-server host command or the radius server name command.
  • If you have configured an IPv6 RADIUS server, use the radius server name command.
Beginner

Per another forum...........

Per another forum...........

!

The new syntax is given this link:

https://supportforums.cisco.com/discussion/11464936/radius-2960-and-2955

radius server AAAISE1

address ipv4 10.19.250.50 auth-port 1812 acct-port 1813

key 7 01115506555E172F32

!

radius server AAAISE2

address ipv4 10.19.250.51 auth-port 1812 acct-port 1813

key 7 130744101444150A38